X96 Mini: serial console access
TO COMPLETE
The Q6X V2.2 board (ref. 17355, S905W SoC) exposes a serial console (UART) that is useful for troubleshooting.
| Board | Q6X V2.2, ref. 17355 |
|---|---|
| SoC | Amlogic S905W |
| UART | Four pads GND, VCC, RX, TX, near the eMMC (SEC810 chip) |
| Adapter | Arduino Nano (ATmega328P + CH340) as a troubleshooting USB-TTL adapter |
Warning. An Arduino Nano uses 5 V logic, the board uses 3.3 V. Check the voltage of the serial link before any connection, or use a 3.3 V adapter. TODO(nico): confirm the level and the wiring used.
TODO(nico): high-resolution photo with a scale reference
- GND
- VCC
- RX
- TX
Evidence
TODO(nico): provide the UART boot log, the output of /proc/cpuinfo and the capture of the seller listing (identifiers masked).